Submersible Pump, Easy Drain 110VAC, 180GPH
Submersible Pump, Easy Drain 110VAC, 180GPH
| All Parts #: | 34-319-1000 |
| Manf.: | Tecmark Corporation |
| Manf. #: | LAP115 |
April 30, 2011 at 10:06 pm Comments (0)
Submersible Pump, Easy Drain 110VAC, 180GPH
| All Parts #: | 34-319-1000 |
| Manf.: | Tecmark Corporation |
| Manf. #: | LAP115 |
Cal Pump Submersible Waterfall Pump
Waterfall Pump
Plastic submersible pump, screened sump type suction. 4.10–6.90 amps, 115v, 7-3/4″ x 11-1/2″, 1-1/4″fnpt discharge
| Discharge head in feet | Gallons per minute |
|---|---|
| 1 | 82 |
| 5 | 77 |
| 10 | 70 |
| 20 | 55 |
| 25 | 46 |
| 30 | 38 |
| 35 | 29 |
| 40 | 19 |
| 45 | 8 |
SPIDER GASKET 1.5″SIDE MOUNT MULTIPORT VALVE(G-416)
All Parts # 27-102-1126
spa Tefel Element Loop 1.0KW 120v 7-1/8″
| All Parts #: | 47-371-4045 | ||
| Manf.: | Therm Products | ||
| Manf. #: | 70-20110-TE
DescriptionFlow Thru Element Looped Style DescriptionFlow Thru Element Looped Style |
| All Parts #: | 35-185-1200 |
| Manf.: | Advantage Manufacturing |
| Manf. #: | 500600-65 |
Jet Internal,Micro Barrel,Directional,Emerald,White
Replacement Genesis Electrode Assy , www.allpartspoolandspa.com
| All Parts #: | 43-139-1000 |
| Manf.: | Pioneer H2O Technologies |
Replacement P-15 Electrode Assy (CPE-1)
| All Parts #: | 43-139-1600 |
| Manf.: | Pioneer H2O Technologies |
| Manf. #: | CPE-1 |
Parts for pool and spa sand filters
For pools the most popular filtration is also the oldest, sand filtration. All sand filters have 2 things in common. 1) Water flows from top to bottom when the filter is in filtration mode. And 2) they all have an under drain with slots or a lateral system that allows the filtered water to pass through and holds back the sand.
Typically sand filters use special filter sand that is .45 to .55 mm (#20 silica pool-grade sand) which has sharp edges that separate the particles allowing particles to be trapped. Initially large particles will be trapped and then as the sand loads up smaller particles will be trapped.
Sand filters need the sand media to be cleaned regularly by backwashing. This is the process by which the flow is reversed on the filter and the dirt is washed to waste.