Sta-Rite Troubleshooting Tips
The Sta-Rite SR series pool heater is easy to work on because they have built in trouble lights to help you find the problem. If you look at the circuit board on the underside of the top-side you will see a series of labeled lights that can tell you in what part of the system to begin your troubleshooting. They also make a slide card that walks you through the necessary steps for finding the problem.
This first video gives you more details.
If you need to find the serial number and manufacture date on the Sta-Rite heater you need to remove the cover and look for the spec sheet attached to the cover where the fenwal is located. This gives you all the necessary information.
The Sta-Rite heater should be wired to the pool pump and should have a disconnect for safety.
Watch the video for more details.
March 11, 2010 at 3:07 pm